Send Inquiry
|
Level Ultrasonic Transmitter
ULTRASONIC LEVEL TRANSMITTER
- Simple push-button calibration.
- Output 4-20 mA ,20-4 mA.
- Built-in temperature compensation.
- Compact Size for Easy Mounting.
APPLICATION
- Food and Beverages
- Chemicals
- Water/Waste water
- Oils
Mechanical
| Conduit Entry | 1/2"NPT Hole (PVC Conduit only) |
| Enclosure | PVC-94V0 |
| Sensor | Standard-PVC, |
|
| S.S.(sanitary only) (Opt) |
|
| Teflon(standard mtg.only) (Opt) |
| Ingress Protection | NEMA 4X(IP65) |
Environmental
| Temperature | -40 To 140F (-40 to 60C) |
| Optional | -40 To 266F (-40 to 30C) |
| Pressure | Std.Sensor 2 bar |
|
| Sensor 5bar max.(Opt.) |
|
| (High Temperature/ Pressure Transducer) |
| Approvals | Intrinsic Pending |
| Installation Category | Class II |
Operational
| Accuracy | +/-0.1% of max. span (in lab using 4- 20m A current output) |
|
| +/-0.25% of max. range (Typically in field) |
| Beam Angle | 10 -1 2 degree at-3dB |
| Loss of Echo | Hold 30 seconds,22 or3.5 mA (avg.) |
Calibration: 4-20 or 20-4mA output
FULL - Calibrate 20 mA or 4mA (Set Near Target)
- Calibration mode LED coloris Blinking Green.
- Push button and hold until LED turns Yellow (20 mA) or push button and hold until LED turns
- Red (4 mA)
- Release button, observe LED flashes to acknowledge the calibration.
EMPTY- Calibrate 4 mA or 20 mA (Set For Target)
- Calibration mode LED color is Blinking Green.
- Push button and hold until LED turns Red (4 mA) or push button and hold until LED turns Yellow (20 mA)
- Release button, observe LED flashes to acknowledge the calibration.
LOSS OF ECHO-22mA or 3.5 mA
- To choose 22mA press and hold button until the light goes off-2 flashes
- To choose 3.5mA press and hold button until the light goes off - 1 flash
Electrical specifications
| Power ABM200: | 12 to 28VDC |
| 0.025A max @24VDC | |
| Output: | 4-20mA output 6UA resolution |
| Range code | Operating range (liquids) | Res. | Mounting standard |
| 052 | 0.9-50ft 0.27-15.2m | 0.23 5.7mm | 2.0 NPT 1.8 x 2.25 H |
| 070 | 0.8-30ft 0.24-9.1m | 0.13" 3.4mm | 2.0 NPT 1.8 x 2.25 H |
| 080 | 0.7-20ft 0.21-6.1m | 0.088" 2.2mm | 2.0 NPT 1.8 x 2.25 H |
| 081 | 0.6-16ft 0.18-4.9m | 0.07" 1.8mm | 1.5 NPT 1.5 x 2.1 H |
| 148 | 0.4-9ft 0.12-2.7m | 0.04" 0.98mm | 1.0 NPT 1.1 x 2.0 H |
Contact Details
Faridabad, Haryana, India
Send Inquiry |
FLOW AND CONTROL SYSTEM PVT LTD
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |