|
Send InquiryUltrasonic Level Transmitter
Price 30000.0 INR/ Piece
Ultrasonic Level Transmitter Specification
- Product Type
- Level Ultrasonic Transmitter
- Application
- Food and Beverages ,Chemicals Water/Waste water, Oils
- Color
- Gray/Green
Ultrasonic Level Transmitter Trade Information
- Minimum Order Quantity
- 1 Piece
- Delivery Time
- 1-2 Week
- Main Domestic Market
- All India
About Ultrasonic Level Transmitter
ULTRASONIC LEVEL TRANSMITTER
* Simple push-button calibration.
* Output 4-20 mA ,20-4 mA.
* Built-in temperature compensation.
* Compact Size for Easy Mounting.
APPLICATION
* Food and Beverages
* Chemicals
* Water/Waste water
* Oils
Mechanical
|
Conduit Entry |
1/2"NPT Hole (PVC Conduit only) |
|
Enclosure |
PVC-94V0 |
|
Sensor |
Standard-PVC, |
|
|
S.S.(sanitary only) (Opt) |
|
|
Teflon(standard mtg.only) (Opt) |
|
Ingress Protection |
NEMA 4X(IP65) |
Environmental
|
Temperature |
-40' To 140 deg F (-40 to 60 deg C) |
|
Optional |
-40 To 266 deg F (-40 to 30 deg C) |
|
Pressure |
Std.Sensor 2 bar |
|
|
Sensor 5bar max.(Opt.) |
|
|
(High Temperature/ Pressure Transducer) |
|
Approvals |
Intrinsic Pending |
|
Installation Category |
Class II |
Operational
|
Accuracy |
+/-0.1% of max. span (in lab using 4- 20m A current output) |
|
|
+/-0.25% of max. range (Typically in field) |
|
Beam Angle |
10 -1 2 degree at-3dB |
|
Loss of Echo |
Hold 30 seconds,22 or3.5 mA (avg.) |
Calibration: 4-20 or 20-4mA output
FULL - Calibrate 20 mA or 4mA (Set Near Target)
* Calibration mode LED coloris Blinking Green.
* Push button and hold until LED turns Yellow (20 mA) or push button and hold until LED turns
* Red (4 mA)
* Release button, observe LED flashes to acknowledge the calibration.
EMPTY- Calibrate 4 mA or 20 mA (Set For Target)
* Calibration mode LED color is Blinking Green.
* Push button and hold until LED turns Red (4 mA) or push button and hold until LED turns Yellow (20 mA)
* Release button, observe LED flashes to acknowledge the calibration.
LOSS OF ECHO-22mA or 3,5 mA
* To choose 22mA press and hold button until the light goes off-2 flashes
* To choose 3.5mA press and hold button until the light goes off - 1 flash
Electrical specifications
|
Power ABM200: |
12 to 28VDC |
|
0.025A max 24VDC |
|
|
Output: |
4-20mA output 6UA resolution |
Price:
- 50
- 100
- 200
- 250
- 500
- 1000+
Contact Details
GST : 06AACCF5431B1Z8
Send Inquiry |
FLOW AND CONTROL SYSTEM PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
